Piezas de inyección de combustible - Banco de Pruebas
banco de pruebas Tecnología avanzada internacional 1.Imported, utilice el embalaje original importado convertidor, el banco de pruebas tiene un amplio margen de velocidad y buen funcionamiento dinámico.
2.Direct salida del motor principal, la puesta en marcha con la baja tensión, ahorro de energía, un pequeño valor de la reducción de la velocidad, la precisión de las mediciones, una buena fiabilidad, y la función completa protección automática.
Velocidad de rotación 3.Clockwise o en sentido contrario es 0-4000r/min.It adopta WZ-I controlador digital con todas las funciones y muestra siete turnos preestablecidos de velocidad, velocidad de rotación, cuenta, temperatura del aceite combustible. Y están equipadas con sistemas tales como el suministro de presión positiva y negativa de aire, bomba de VE presión interna, la cantidad de aceite reture, fuente de alimentación eléctrica de corriente continua y así sucesivamente.
Tiene funciones completas
4.Controlled por la industria informática y equipada Toberas con pantalla digital. Se puede utilizar normalmente, incluso si el equipo no se inicia. Es realmente un rendimiento fiable y de alto costo.
5.El equipo en el banco de pruebas tiene una base de datos a gran escala, más de 2.000 parámetros técnicos de la bomba de combustible se puede denominar fácilmente.
Main Technical Parameter of Fuel Injection Pump Test Bench | |||||||
The test benaches are used for testing injection nozzle opening pressure, leakage Spray pattern, atomisation & chatter characteristic tests. The test benches are suitable for wide range of fuel injection pumps including rotary and distributor types and covers every possible requirement for testing the full range of pumps. Very high precision indeed is demanded for the fuel delivery, port closing and speed control of modern diesel fuel injection systems-primarily so that optimum fuel consumption/power output ratios can be achieved. |
|||||||
Specification | 7.5KW | 11KW | 15KW | 18.5KW | 22KW | 30KW | |
Rotation speed range of main shaft (rpm) | 0-4000 | 0-3000 | 0-3000 | 0-3000 | 1-2000 | 0-1470 | |
Motor output power(KW) | 7.5 | 11 | 15 | 18.5 | 22 | 30 | |
Pump output power(KW) | 0.75 | 0.75 | 0.75 | 1.1 | 1.5 | 1.5 | |
Height from center line of main shaft to work table(mm) | 125 | 125 | 125 | 125 | 125 | 125 | |
Rotation direction of main shaft | Positive, negative | Positive, negative | Positive, negative | Positive, negative | Positive, negative | Positive, negative | |
Testable cylinders of injection pump | 12 | 12 | 12 | 12 | 12 | 12 | |
Standard model of fuel injector | |||||||
oil injection count range | 0-1000 | 0-1000 | 0-1000 | 0-1000 | 0-1000 | 0-1000 | |
Capacity of oil tank (L) | >50 | >50 | >50 | >50 | >100 | >100 | |
Pressure of fuel system | High | 0-4 | 0-4 | 0-4 | 0-4 | 0-4 | 0-4 |
Low | 0-0.4 | 0-0.4 | 0-0.4 | 0-0.4 | 0-0.4 | 0-0.4 | |
Supply oil capacity (L/min) | >10 | >10 | >10 | >10 | >20 | >20 | |
Temperature of fuel () | 402 | 402 | 402 | 402 | 402 | 402 | |
Precise of fuel filter () | 5 | 5 | 5 | 5 | 5 | 5 | |
Capacity of measuring cup (ml) | 45/150 | 45/150 | 45/150 | 45/150 | 45/260 | 45/260 | |
Pressure of air way (Mpa) | Positive | 0-0.3 | 0-0.3 | 0-0.3 | 0-0.3 | 0-0.3 | 0-0.3 |
Pressure of air way (Mpa) | Negative | -0.05 | -0.05 | -0.05 | -0.05 | -0.05 | -0.05 |
DC voltage (V) | 12/24 | 12/24 | 12/24 | 12/24 | 12/24 | 12/24 |
The main function of Fule pump test bench | |
1.Test each cylinder's oil supply capacity at various rotation speeds. | 9.Test the interior pressure of distribution pumps. |
2.Statically check the start point and interval angle of oil supply of each cylinder. | 10.Test the negative pressure performance of pneumatic speed regulators. |
3.Check and adjust the performance of meachanical speed regulators. | 11.Test the oil supply pressure of distribution pump |
4.Test the electromagnetic valve of distribution pump . | 12.Measure the oil-return quantity of distribution pump. |
5.Check the performance of pneumatic speed regulators | 13.Self-suction joint |
6.Test the sealing performance of injection pump. | 14.Print(optional) |
7.Check the performance of pressure compensators | 15.Database(optional) |
8.Measure the advance angle of advance device | 16.Test the tack bar travle(optional) |